
		Bike Care

		Car Care Kits

		Convertible Tops

		Detailing Tools

		Exterior Car Care

		Interior Car Care

		Microfiber

		Polishers and Pads

		Shop by Brand

Home » Exterior Car Care » Water Spots and Swirl Removers

Menzerna PO106FF. Germany's top polish

$CAD 51.99

Quantity :

Temporarily Out Of Stock

32oz

Please see Blackfire Scratch Resistant Clear Finishing Polish as it is PO106FF with additional lubrication

Germany's most advanced polish for conventional and scratch-resistant clear coats.

This is the world's hottest, most elusive polish. It is a finishing polish made by Menzerna of Germany for the OEM market. Currently it is being used in Europe and in selected GM and Daimler Chrysler plants here in the US.

Menzerna PO106FF Polish was designed to remove very fine swirls from the new, super-hard, ceramic clear coats. These are the BASF clear coats being used on the Maybach and 2004-5 Rolls Royce Phantom and PPG's CeramiClear* which is being used on the 2005 and newer Mercedes.

The claim-to-fame of this polish is its ability to remove very fine swirls and surface defects in one step while leaving a PERFECT, mirror-like surface. PO106FF uses a unique, extremely, extremely, fine, powdered abrasive. I'm told by Menzerna that the particle size of the abrasives in this polish are smaller than any polish made by any manufacturer in the world. While micro-sized, these particles have an edge so sharp they can "cut" or burnish the new ceramic clear coats. Like polishing glass, the smoother you make the paint or clear coat, the greater the reflection. The limiting factor of any polish is the size of the abrasive particle used. The smaller the abrasive, the smoother you can burnish the finish.

PO106FF is designed to remove very fine (3000 grit) swirls and blemishes in the new super-hard clear coats yet is still safe for use on conventional clear coats.

Update February, 2006: BLACKFIRE announced the introduction of a Scratch Resistant Clear Finishing Polish and a Scratch Resistant Clear Compound made by Menzerna, Germany. Both of these new products are exclusive to BLACKFIRE and are designed for compounding and polishing fully cured, ceramic particle and scratch-resistant clear coats as well as conventional clear coats. BLACKFIRE Scratch Resistant Clear Finishing Polish is PO106FF with additional lubrication that allows the enthusiast to polish longer before the polish dries out.

•

•

•

•