
		Bike Care

		Boat Care

		Car Care Kits

		Convertible Tops

		Detailing Tools

		Exterior Car Care

		Interior Car Care

		Microfiber

		Polishers and Pads

		Shop by Brand

Home » Polishers and Pads » Lake Country CCS Pads

6" Flexible Backing Plate for Porter Cable Orbital Polishers

$CAD 19.99

Quantity :

Our best backing plates
for dual-action polishers.

Advantages of Molded, Urethane Backing Plates:

- The VELCRO® brand fastening material is molded into the plate eliminating delamination.
- Urethane reduces spontaneous heat build-up when transitioning from flat to contoured surfaces. These plates are recommended for compounding, polishing and finishing "soft" German clear coats.
- Vastly reduced heat transfer keeps motor heat from being transferred to the paint surface.
- Plated steel, 5/16 x 24 threaded post fits dual-action polishers like the Porter Cable 7424.
- Reinforced inner construction uses steel struts molded into the center hub for superior strength.

Always use the recommended size backing plate for the sized pad you are using. Never use a backing plate that is larger than the foam pad or disc.

Note: While these Urethane Backing Plates are often referred to as "Flexible", this is not a concern with dual-action polishers where the pad is placed flat on the surface. Flexibility of backing plates is more of an issue when using a circular, high-speed polisher and working the pad "on-edge".

Use this 6 inch Flexible, Urethane Backing Plate with discs and pads measuring 6 to 7.5 inches* in diameter.

This plate works perfectly with our standard, 6-1/2 inch, Hi-gloss, Constant Pressure Pads.

The 5/16-24 threaded post screws directly into the Porter Cable 7424 polisher allowing quick and easy pad exchanges.

•

•

•

•