
		Bike Care

		Boat Care

		Car Care Kits

		Convertible Tops

		Detailing Tools

		Exterior Car Care

		Interior Car Care

		Microfiber

		Polishers and Pads

		Shop by Brand

Home » Polishers and Pads » Lake Country CCS Pads

7.5" Orange CCS Power Pads

$CAD 12.49

Quantity :

For those of you new to machine polishing, Lake Country started a small revolution in the polishing industry when they introduced these pads to the U.S. market in 2003.

So what's the big deal about an orange pad?
In lay terms, Reisgies Schaumstoffe, Gmbh, Germany, has developed a foam formula with the cutting power of a compounding foam and the gloss enhancing characteristics of a polishing foam. When used with the proper polishing compounds, this orange pad removes 2000 grit sanding traces, swirls and paint defects with minimal or no surface dullness. Dullness, or haze, is a normal result of compounding. Haze is typically removed using increasingly less abrasive polishes until the paint's gloss is restored. This pad creates so little haze that you can often go from compounding right to finishing without the intermediate polishing steps. Where polishing is still required (often on black and red cars), it can be accomplished in a fraction of the time it would take with standard pads.

It gives the enthusiast the ability to remove swirls, water spots and fine scratches without spending hours polishing out surface haze!

Now with CCS Technology!

In September of 2006, this orange, German, Power Pad foam was introduced with Closed Cell Structure (CCS) Technology at Automekanica in Frankfurt, Germany. The newer, harder, scratch-resistant clear coats require longer polishing times to remove swirls, spots and defects. The longer you polish with conventional foam pads, the less effective they become because polish migrates below the working surface of the pad. The pad "dries out."

Closed Cell Structure (CCS) Technology solves this problem using strategic patterns of partially closed foam cells. These cells slow the rate of polish absorption, gradually releasing polish as needed by the operator. CCS Pockets reduce surface tension, prevent pad skipping and allow the operator to run the pad flat on the working surface.

Professional results, even if you're a beginner!

These new, CCS Pads continue to incorporate the latest, Constant Pressure™ technology.

Constant pressure may not be good for people but it's great for polishing pads where you want a uniform and constant pressure on the surface being polished. Professionals have learned through experience to keep their machines parallel to the surface being polished. Tilting the machine in any direction can result in an uneven and excessive pressure being transferred to the painted surface.

This new Constant Pressure technology uses a layer of engineered, instant rebound foam between the pad and the backing plate to absorb off-axis movements while keeping the pressure of the pad on the surface constant. It allows even beginners to achieve professional-like results

•

•

•

•