
		Bike Care

		Car Care Kits

		Convertible Tops

		Detailing Tools

		Exterior Car Care

		Interior Car Care

		Microfiber

		Polishers and Pads

		Shop by Brand

Home » Shop by Brand » Blackfire

Blackfire PolyClay II (8oz)

$CAD 23.99

Quantity :

8oz.

The quick solution to rough, gritty paint finishes!

If you drive your car, it is going to collect paint contamination. There is no wax or paint sealant that can fully protect against contamination from rail dust, brake dust and environmental fallout. Most paint contamination consists of tiny metallic particles from brake pad linings and rail dust created from the friction of train wheels against railroad tracks. These hot metallic particles fill the air on highways and near railroad tracks where they ultimately land on your car's finish, burning through any wax or sealant coating and embedding themselves in the top paint or clear coat layer. They can be felt as a "rough or gritty" texture on the paint's finish. Less severe paint contamination consists of overspray, tree sap mist and industrial pollution. If left untreated, this contamination can cause tiny rust spots in your car's finish.

Traditionally, the only way to remove this contamination was to machine compound or abrade away the top layer of paint or clear coat.

Obviously, this could only be done a limited number of times as there was always the risk of removing too much paint.

In the early 1990's, clay bars were developed in Japan that removed this contamination by "pulling" it off the surface. These bars were not abrasive and did not remove any of the top paint layer. These bars were brought to the United States where they have been constantly evolving and improving. BLACKFIRE PolyClay II is the latest in clay technology. These clay-like bars of entirely man-made polymers have a number of advantages over traditional clays:

- PolyClay II does not dry out with age and does not decompose with repeated applications.

- A single non-abrasive grade works on all paint conditions yet is still clearcoat safe.

- PolyClay II is easier to work with and leaves almost no residue on the surface making clean-up easier.

One 8 oz. bar of PolyClay II will clean up to 20 cars.

caution:b> Use only as directed and with an approved lubricant such as BLACKFIRE Clay Lubricant to reduce friction between the PolyClay and the vehicle's surface. Reciprocate or glide PolyClay along the lubricated surface until finish is smooth and contaminants are removed. When used as directed in the conventional method of polishing, contaminants can be removed from the surface without causing swirls.

•

•

•

•